Your cart is empty

Troubleshooting

Troubleshooting
Heavy Use
Should you have more than the average number of people in your spa, or ever get a slight organic odor, your spa water may need to be 'shocked'. To be more environmental we suggest Spa Chlorine Granules (99% sodium dichlor), because this particular type of chlorine dissipates out of your spa water, when you run all pumps on high with the cover open 30-45 minutes (be sure all jets are open). Before draining, and to be more environmentally friendly, test your water to ensure that all chlorine has dissipated.
This Water Treatment & Conditioner is also compatible with non-chlorine shocks, however not recommended because it contains up to 7 other chemicals that do not dissipate out of the spa water.
Cloudy Water
Color & clarity of your spa water can best be evaluated using a clear drinking glass. Water may become cloudy from soap residues or dyes in bathing suits. Cosmetics, lotions, deodorants, body oils, & some fragrances also may cause cloudy water. Also check pH, alkalinity levels, & calcium hardness, and adjust Only If Necessary!
To clear up cloudy water, rinse your filter(s). If your filters are over a year old or you have used bleach, they are no longer effective. We suggest you purchase new filters.
Green Tinted Water
This rare condition could be from bathing suits (black, blue, or green colored suits) or blue spa filters. If none of these apply have your water tested for copper, and use a metal out product sold at your local spa store. Be sure to use a garden hose Pre-Filter when filling spa the next time which will reduce or eliminate this problem.
To Prevent Scaling
If necessary, to prevent Stain & Scale add recommended amount of a Stain & Scale control weekly. Defender, found on our website is the only non-toxic Stain & Scale control we could find.
Foam
Soft water under 200ppm will cause foaming. Have your water tested, a calcium increaser may be needed to solve this issue. Excessive foaming however, is almost always a result of soap residue left in bathing suits. Just remove with a skimmer net and rinse your filter(s). You may have to do this twice because of the foam left in the lines in your spa. Very small amounts of 'Dirty Foam' at times may appear, this is simply the Water Treatment & Conditioner taking contaminants to your filter(s), which is what it is designed to do. Double rinse bathing suits in hot water to remove dyes, soap & phosphates found in soap. A soap-less shower is recommended before entering your spa.
High or Low pH / Alkalinity
Wait 24-hours before checking pH & Alkalinity, and only adjust if necessary. Usually our product will keep these balanced in the proper range. Use Spa Up or Spa Down, and check again within 24-hours.
Organic Odor
Shocking weekly should eliminate this, however if you do have an organic odor be sure all jets including neck, waterfalls, etc.. are open slightly when spa is not in use. Usually a teaspoon or two of the 99% sodium dichlor, depending on size of spa should remedy this quickly.
footer